Page 20 - Content.pmd

Professional metal 52.Make riveted lap and butt joint. (6 hrs.) Various rivets shape and form of
Skill 19Hrs; components by 53.Make funnel as per development and heads, importance of correct head
riveting observing size.
Professional solder joints. (8 hrs.)
Knowledge standard 54.Drill for riveting. (1 hr.) Rivets-Tin man's rivets types, sizes,
03Hrs procedure. and selection for various works.
CSC/N0304 55.Riveting with as many types of rivet
as available, use of counter sunk head Riveting tools, dolly snaps
rivets. (4 hrs.) description and uses. Method of
riveting,
The spacing of rivets. Flash riveting,
use of correct tools, compare hot
and cold riveting. (03 hrs.)

Professional metal 56.Welding - Striking and maintaining Safety-importance of safety and
Skill 21Hrs; component by ARC, laying Straight-line bead. (21 general precautions observed in a
Professional welding hrs.) welding shop. Precautions in
Knowledge observing electric and gas welding. (Before,
04Hrs standard during, after) Introduction to safety
procedure. equipment and their uses.
CSC/N0304 Machines and accessories, welding
transformer, welding generators.
(04 hrs.)
Professional Cut and join metal 57.Making butt joint and joint-gas and Welding hand tools: Hammers,
Skill 64Hrs; component by gas ARC. (12 hrs.) welding description, types and
Professional (oxy-acetylene) 58.Do setting up of flames, fusion runs uses, description, principle, method
Knowledge CSC/N0304 with and without filler rod, and gas. of operating, carbon dioxide
16Hrs (8 hrs.) welding. H.P. welding equipment:
description, principle, method of
operating L.P. welding equipment:
description, principle, method of
operating. Types of Joints-Butt and
fillet as per BIS SP: 46-1988
specifications. Gases and gas
cylinder description, kinds, main
difference and uses. (05 hrs.)

59.Make butt weld and corner, fillet in ARC Setting up parameters for ARC
welding (22 hrs.) welding machines-selection of
Welding electrodes. Care to be
taken in keeping electrode. (05
hrs.)
60.Gas cutting of MS plates (22 hrs. Oxygen acetylene cutting-machine
description, parts, uses, method of
handling, cutting torch-description,
parts, function and uses. (06
hrs.)
Professional Produce 61.Mark off and drill through holes. (04 hrs.) Drill- material, types, (Taper shank,
Skill 143Hrs; components by 62.Drill on M.S. flat. (1 hrs.) straight shank) parts and sizes. Drill
Professional different operations 63.File radius and profile to suit gauge. (10 angle-cutting angle for different
materials, cutting speed feed.
Knowledge check hrs.) R.P.M. for different materials. Drill
26Hrs accuracy using
appropriate 64.Sharpening of Drills. (1 hrs.) holding devices- material,
measuring construction and their uses. (04
instruments.[Different 65.Practice use of angular measuring hrs.)
- instrument. (04 hrs.) Counter sink, counter bore and spot
Drilling, Reaming, 66.Counter sink, counter bore and ream facing-tools and nomenclature,
Taping, Dieing; split fit (three piece fitting). (04 hrs.) Reamer- material, types (Hand and
Appropriate 67.Drill through hole and blind holes. (2 hrs.) machine reamer), kinds, parts and

(xviii)