Page 20 - Welder - TP - Kannada

OAGC-04 16 Marking and perform radial cuts, cutting
out holes using oxy-acetylene gas cutting.
17 Identify cutting defects viz., distortion,
grooved, fluted or ragged cuts; poor
OAGC-05 draglines; rounded edges; tightly adhering
slag.
18 Square butt joint on M.S. sheet 2 mm thick
OAGC-06

safety precautions. OAW-04 in flat Position. (1G)
[Different position: - 19. Fillet “T” joint on M.S. Plate 10 mm thick - Arc welding power sourc-
1F, 2F, 3F, 1G, 2G, in flat position. (1F) es: Transformer, Rectifier
3G.] SMAW-04 20. Open corner joint on MS sheet 2 mm and Inverter type welding
Set t he SMAW thick in flat Position (1F) machines and its care
machine and perform OAW-05 21 Fillet lap joint on M.S. plate 10 mm thick &maintenance..
different type of joints - Advantages and disad-
on MS in different vantages of A.C. and D.C.
position observing
standard procedure. SMAW-05 in flat position. (1F) welding machines
[different types of 22 Fillet “T” joint on MS sheet 2 mm thick in - Welding positions as per
joints- Fillet ( T-joint, flat position. (1F) EN &ASME: flat, horizon-
lap & Corner), OAW-06 23 Open Corner joint on MS plate 10 mm tal, vertical and over head
Butt (Square & V); thick in flat position. (1F) position.
different position - SMAW-06 - Weld slope and rotation.
1F, 2F, 3F,4F, 1G, 24 Fillet Lap joint on MS sheet 2 mm thick
2G, 3G, 4G] - Welding symbols as per
Set t he SMAW OAW-07 in flat position. (1F) BIS & AWS.
machine and 25 Single “V” Butt joint on MS plate 12 mm - Arc length - types - effects
perform different thick in flat position (1G). of arc length.
type of joints on MS SMAW-07
in different position 26 Testing of weld joints by visual inspection. - Polarity: Types and ap-
27 Inspection of welds by using weld gauges. plications.
I&T-01 28 Square Butt joint on M.S. sheet. 2 mm - Weld quality inspection,
OAW-08 thick in Horizontal position. (2G) common welding mis-
29 Straight line beads and multi layer takes and appearance of
good and defective welds
- Weld gauges & its uses.
practice on M.S. Plate 10 mm thick in - Calcium carbide uses
Horizontal position. and hazard.
SMAW-08
30 Fillet “T” joint on M.S. plate 10 mm thick - Acetylene gas properties
in Horizontal position. (2F) and flash back arrestor.
SMAW-09 31 Fillet Lap joint on M.S. sheet 2 mm thick - Oxygen gas and its prop-
OAW-09 in horizontal position (2F) erties, uses in welding.
SMAW-10
32 Fillet Lap joint on M.S. plate 10 mm thick

in horizontal position. (2F) - Charging process of oxy-
33 Fusion run with filler rod in vertical position gen and acetylene gases
- Oxygen and Dissolved
Acetylene gas cylinders

on 2mm thick M.S sheet. and Color coding for
34 Square Butt joint on M.S. sheet. 2 mm different gas cylinders.
thick in vertical position (3G) - Uses of single and double
stage Gas regula-
tors.
- Oxy acetylene gas welding
Systems (Low pressure
and High pressure).

(xviii)