Page 15 - Fitter - 1st Year - TP- Gujarati
P. 15
LEARNING / ASSESSABLE OUTCOME
On completion of this book you shall be able to
SI.No. Learning Outcome Exercise No.
1 Make & assemble components of different mating surfaces as per
required tolerance by different surface finishing operations using
different fastening components, tools and check functionality.
[Different Mating Surfaces – Dovetail fitting, Radius fitting,
Combined fitting; Different surface finishing operations – Scraping, 2.1.115 - 2.1.138
Lapping and Honing; Different fastening components – Dowel pins,
screws, bolts, keys and cotters; Different fastening tools-hand
operated & power tools, Required tolerance - ±0.02mm, angular
tolerance ± 10 min.] (Mapped NOS: CSC/N0304)
2 Make different gauges by using standard tools & equipment and
checks for specified accuracy. [Different Gauges – Snap gauge, 2.2.139 - 2.2.148
Gap gauge; Specified Accuracy - ±0.02mm]
(Mapped NOS:CSC/N0304)
3 Apply a range of skills to execute pipe joints, dismantle and assemble
valves & fittings with pipes and test for leakages.[Range of skills – 2.3.149 - 2.3.156
Cutting, Threading, Flaring, Bending and Joining]
(Mapped NOS:CSC/N0304)
4 Make drill jig & produce components on drill machine by using 2.4.157 - 2.4.158
jigs and check for correctness. (Mapped NOS:CSC/N0304)
5 Plan, dismantle, repair and assemble different damaged mechanical
components used for power transmission & check functionality. 2.5.159 - 2.5.170
[Different Damage Mechanical Components – Pulley, Gear,
Keys, Jibs and Shafts.] (Mapped NOS:CSC/N0304)
6 Identify, dismantle, replace and assemble different pneumatics and
hydraulics components. [Different components – Compressor, 2.6.171 - 2.6.176
Pressure Gauge, Filter Regulator Lubricator, Valves and Actuators.]
7 Construct circuit of pneumatics and hydraulics observing standard 2.6.177 - 2.6.179
operating procedure& safety aspect.
8 Identify, dismantle, replace and assemble different pneumatics and
hydraulics components. [Different components – Compressor, 2.6.180 - 2.6.184
Pressure Gauge, Filter Regulator Lubricator, Valves and Actuators.]
9 Construct circuit of pneumatics and hydraulics observing standard 2.6.185 - 2.6.186
operating procedure& safety aspect.
10 Plan & perform basic day to day preventive maintenance, repairing
and check functionality. [Simple Machines – Drill Machine, Power 2.7.187 - 2.7.192
Saw and Lathe] (Mapped NOS:CSC/N0304)
11 Plan, erect simple machine and test machine tool accuracy. 2.7.193 - 2.8.196
[Simple Machines – Drill Machine, Power Saw and Lathe]
(xiii)