Page 259 - Fashion Design Technology-TP- Hindi

काय का म(Job Sequence)

Fig 2 INSTRUCTIONS FOR DRAFTING

Bodice
TASK 1 but draft front and back separately. Modify the instructions as follows:
In front side 6-7 = 2 cm instead of 1 cm. Delete the dart in front.
Tucks in front
0-29 = 18-30 Join 29-30, mark 4 points at a
= Ch/12 + 2 cm distance of 1.25 cm from line 29-30 respectively towards arm hole (position after stitching the
tucks). Draw parallel lines in vertical direction.
Copy the outline of front bodice.
Slash the copy of front part of bodice from 29-30. Paste the two parts on other sheet of brown
paper, leaving 2 cm space in between (additional material for preparing 4 tucks i.e. 0.5 cm for each
tuck). Cut along the outlines. (Fig 2a)
Mark tuck position at a distance of 1.75 cm between each. Set notches on top and bottom.
(Fig 2b)
Take care to maintain the level of chest line.

The unslashed pattern on the bodice piece with the tuck will serve as a correction pattern,
i.e. after preparing the tucks on the bodice piece shape should be congruent with the
manipulated pattern.

Skirt
Square out horizontally and vertically from 0.
W
0-1 Draw a square 0-1-2-3
8
W
0-2
8
1-3 = 2-4 = FL - NW Put one end of measuring tape/cord on point 0 and
draw a quarter circle from 4-5 upto point 4 and
sweep up to point 5. Repeat the same to draw a
quarter circle from 1-3.

प रधान - फै शन िडजाइन और ौ ोिगकी - (NSQF संशोिधत 2022) - अ ास 1.11.30 243