Page 17 - Fitter- 1st Year TP - Kannada

SYLLABUS FOR FITTER

Reference Professional Skills Professional Knowledge
Duration Learning (Trade Practical) (Trade Theory)

Outcome With Indicative Hours
Professional Plan and organize 1. Importance of trade training, List of All necessary guidance to be provided
Skill 212 Hrs; the work to make job tools & Machinery used in the trade. to the new comers to become familiar
as per specification (1 hr.) with the working of Industrial Training
Professional applying different
Knowledge types of basic 2. Safety attitude development of the Institute system including stores
37Hrs trainee by educating them to use procedures.
fitting operation
and Check for Personal Protective Equipment (PPE). Soft Skills, its importance and Job
dimensional (5 hrs.) area after completion of training.
accuracy following 3. First Aid Method and basic training. Importance of safety and general
safety precautions. (2 hrs.) precautions observed in the in the
[Basic fitting 4. Safe disposal of waste materials like industry/shop floor.
operation - marking, cotton waste, metal chips/burrs etc. Introduction of First aid. Operation of
Hacks awing, (2 hrs.) electrical mains and electrical safety.
Chiseling, Filing, Introduction of PPEs.
Drilling, Taping 5. Hazard identification and avoidance.
and Grinding (2 hrs.) Response to emergencies e.g.;
etc. Accuracy: 6. Safety signs for Danger, Warning, power failure, fire, and system failure.
± 0.25mm] caution & personal safety message. Importance of housekeeping & good
CSC/N0304. (1 hrs.) shop floor practices. Introduction to
5S concept & its application.
7. Preventive measures for electrical
accidents & steps to be taken in such Occupational Safety & Health:
accidents. (2 hrs.) Health, Safety and Environment
8. Use of Fire extinguishers. (7 hrs.) guidelines, legislations ®ulations
as applicable.
9. Practice and understand precautions
to be followed while working in fitting Basic understanding on Hot work,
jobs. (2 hrs.) confined space work and material
handling equipment. (04 hrs.)
10. Safe use of tools and equipments used
in the trade. (1 hrs.)
11. Identification of tools &equipment as Linear measurements- its units,
per desired specifications for marking dividers, calipers, hermaphrodite,
& sawing. (4 hrs.) centre punch, dot punch, prick
punch their description and uses
12. Selection of material as per application.
(1 hrs.) of different types of hammers.
Description, use and care of ‘V’
13. Visual inspection of raw material for Blocks, marking off table.
rusting, scaling, corrosion etc. (1 hrs.)
Measuring standards (English,
14. Marking out lines, gripping suitably Metric Units), angular
in vice jaws, hacksawing to given measurements. (04 hrs.)
dimensions. (9 hrs.)
15. Sawing different types of metals of
different sections. (6 hrs.)

16. Filing Channel, Parallel. (5 hrs.) Bench vice construction, types,
uses, care & maintenance, vice
17. Filing- Flat and square (Rough finish), clamps, hacksaw frames and
(08 hrs.) blades, specification, description,
18. Filing practice, surface filing, marking types and their uses, method of
of straight and parallel lines with odd using hacksaws.
leg calipers and steel rule. (5 hrs.)

(xv)